This file is part of the OpenJAUS HTML JAUS Reference.
Please support AS-4 JAUS and SAE by purchasing the corresponding Standard Document(s) from SAE International here.

Home / HmiServiceSet / DigitalControl


Version: 1.0
ID: urn:jaus:jss:HMI:DigitalControl
Inherits From:
extended byurn:jaus:jss:core:AccessControl v1.1
extended byurn:jaus:jss:core:Events v1.1
extended byurn:jaus:jss:core:Transport v1.0

An operator interface that has digital controls, such as a button, either as software or hardware may implement the Digital Control Service that would send a Report DCM message to the remote asset when a digital control push or release occurs. The Digital Control Service is used in conjunction with the Drawing Service. The remote asset may send a Set DCM message to the operator interface to control the current state of a digital control. This allows the operator interface to alter the display of the referenced digital control to be displayed as inset or released, active or inactive and flashing or steady. The remote asset may create an Event for the operator interface to send Digital Control Messages (DCMs). It is highly recommended that this Event should be upon a change and not periodic frequency.

Internal Event Set

Message Set
Message ID Name
2706h QueryDCM
8406h QueryDCMValue
4706h ReportDCM
0706h SetDCM

State Machine Diagram

DigitalControl State Machine Diagram
State Transitions
Label Transition Trigger Conditional Actions
B DigitalControlControlledLoop SetDCM isControllingClient setDCM
A DigitalControlDefaultLoop QueryDCM sendDCMReports
QueryDCMValue sendReportDCM

Action Name Type Description
sendReportDCM Send Action Output Message: ReportDCM
setDCM set the digital control style on the operator interface.

Copyright © SAE International. Reprinted with Permission.
Portions Copyright © OpenJAUS LLC.
The information above is generated from the JAUS Services modelled in the OpenJAUS SDK using OpenJAUS Service Studio. It is provided as a resource to assist JAUS developers and is not a substitute for the JAUS Standards Documents which may be obtained from the SAE International.

Generated on 09/11/2015 from AS6040-HMI.ojss