OpenJAUS.com

This file is part of the OpenJAUS HTML JAUS Reference.
Please support AS-4 JAUS and SAE by purchasing the corresponding Standard Document(s) from SAE International here.
Home / Iop_v3ServiceSet / ReportDigitalAudioCapabilities

Message ReportDigitalAudioCapabilities

Message ID: DAEEh

Description:
This message is used to report full set of capabilities (supported performance levels) for one or more sensors.

ReportDigitalAudioCapabilities
DigitalAudioCapabilitiesList

Message Format
Field # Field Type Units Optional Interpretation
1 DigitalAudioCapabilitiesList List false


DigitalAudioCapabilitiesList
Count Field: Unsigned Short
Field # Field Type Units Optional Interpretation
1 Presence Vector Unsigned Byte one false Bit 0: MinimumAllowedBitRate
Bit 1: MaximumAllowedBitRate
Bit 2: SupportedDigitalFormats
Bit 3: MinSampleRate
Bit 4: MaxSampleRate
Bit 5: SupportedBitDepths
Bit 6: SupportedQualityLevels
2 SensorID Unsigned Short units one false Zero (0) is not a valid sensor ID.
3 MinimumAllowedBitRate Unsigned Short units one true kilobits per second (default = 192 kbps)
4 MaximumAllowedBitRate Unsigned Short units one true kilobits per second (default = 192 kbps)
5 SupportedDigitalFormats BitField
Integer Size: Unsigned Integer		 one true 0: LPCM_PCM
1: AIFF
2: WAV
3: ALAC
4: FLAC
5: RealAudio
6: WMA9_Lossless
7: TrueAudio
8: DolbyDigital
9: DTS
10: MP2
11: MP3
12: AAC_MPEG2
13: AAC_MPEG4
14: VORBIS
15: WMA
16: Speex
6 MinSampleRate Unsigned Integer units one true Samples per second (default = 44100)
7 MaxSampleRate Unsigned Integer units one true Samples per second (default = 44100)
8 SupportedBitDepths BitField
Integer Size: Unsigned Short		 one true 0: EIGHT_BITS
1: TEN_BITS
2: TWELVE_BITS
3: FOURTEEN_BITS
4: SIXTEEN_BITS
5: TWENTY_BITS
6: TWENTY_FOUR_BITS
7: THIRTY_TWO_BITS
9 SupportedQualityLevels BitField
Integer Size: Unsigned Byte		 one true 0: Best
1: Better
2: Good
3: Average
4: Less
5: Poor
6: Worst


OpenJAUS.com

Copyright © SAE International. Reprinted with Permission.
Portions Copyright © OpenJAUS LLC.
The information above is generated from the JAUS Services modelled in the OpenJAUS SDK using OpenJAUS Service Studio. It is provided as a resource to assist JAUS developers and is not a substitute for the JAUS Standards Documents which may be obtained from the SAE International.

Generated on 07/17/2019 from iop_v3.ojss