Provides an abstract interface for the ManipulatorEndEffectorPoseListDriver service. More...

#include <ManipulatorEndEffectorPoseListDriverInterface.h>

Inherits openjaus::mobility::ListManagerInterface.

Inherited by openjaus::manipulator::services::ManipulatorEndEffectorPoseListDriver [virtual].

Public Member Functions
virtual	~ManipulatorEndEffectorPoseListDriverInterface ()

virtual bool	executeTargetList (ExecuteList *executeList)=0
	Begin sequential execution of the target list starting at the specified element. More...

virtual bool	setJointMotionProfile (SetJointMotionProfile *setJointMotionProfile)=0
	Set the joint motion profile parameters for the manipulator. More...

virtual bool	setToolOffset (SetToolOffset *setToolOffset)=0
	Set the location of the tool tip as measured in the end effector coordinate system Set the location of the tool tip as measured in the end effector coordinate system. More...

virtual ReportJointMotionProfile	getReportJointMotionProfile (QueryJointMotionProfile *queryJointMotionProfile)=0
	Send a Report Motion Profile message Send a Report Motion Profile message. More...

virtual ReportActiveElement	getReportActiveElement (QueryActiveElement *queryActiveElement)=0
	Send a Report Active Element message Send a Report Active Element message. More...

virtual ReportCommandedEndEffectorPose	getReportCommandedEndEffectorPose (QueryCommandedEndEffectorPose *queryCommandedEndEffectorPose)=0
	Send a Report Commanded End Effector Pose message Send a Report Commanded End Effector Pose message. More...

virtual ReportToolOffset	getReportToolOffset (QueryToolOffset *queryToolOffset)=0
	Send a Report Tool Offset message Send a Report Tool Offset message. More...

virtual ReportManipulatorSpecifications	getReportManipulatorSpecifications (QueryManipulatorSpecifications *queryManipulatorSpecifications)=0
	Send a report manipulator specs message Send a report manipulator specs message. More...

virtual void	stopMotion ()=0

virtual bool	motionProfileExists (QueryJointMotionProfile *queryJointMotionProfile)=0
	motionProfileExists condition. More...

virtual bool	motionProfileExists (ExecuteList *executeList)=0
	motionProfileExists condition. More...

virtual bool	elementExists (ExecuteList *executeList)=0
	elementExists condition. More...

Public Member Functions inherited from openjaus::mobility::ListManagerInterface
virtual	~ListManagerInterface ()

virtual ReportElement	getReportElement (QueryElement *queryElement)=0
	Send a Report Element message with the requested element. More...

virtual ReportElementList	getReportElementList (QueryElementList *queryElementList)=0
	Send action for ReportElementList with input message QueryElementList. More...

virtual ReportElementCount	getReportElementCount (QueryElementCount *queryElementCount)=0
	Send action for ReportElementCount with input message QueryElementCount. More...

virtual ConfirmElementRequest	getConfirmElementRequest (SetElement *setElement)=0
	Send action for ConfirmElementRequest with input message SetElement. More...

virtual ConfirmElementRequest	getConfirmElementRequest (DeleteElement *deleteElement)=0
	Send action for ConfirmElementRequest with input message DeleteElement. More...

virtual RejectElementRequest	getRejectElementRequest (SetElement *setElement)=0
	Send action for RejectElementRequest with input message SetElement. More...

virtual RejectElementRequest	getRejectElementRequest (DeleteElement *deleteElement)=0
	Send action for RejectElementRequest with input message DeleteElement. More...

virtual bool	setElement (SetElement *setElement)=0
	Store the element(s) in the list with sequence specified by the previous and next element IDs. More...

virtual bool	deleteElement (DeleteElement *deleteElement)=0
	Remove the specified element(s) from the list. More...

virtual bool	elementExists (QueryElement *queryElement)=0
	True if the UID(s) specified in the message that triggered the transition exists in the list. More...

virtual bool	elementExists (DeleteElement *deleteElement)=0
	True if the UID(s) specified in the message that triggered the transition exists in the list. More...

virtual bool	isValidElementRequest (SetElement *setElement)=0
	True if the resulting list will not be invalid as defined by the List Manager Service description and the receiving entity has sufficient memory to store the element(s). More...

virtual bool	isElementSupported (SetElement *setElement)=0
	False. More...

Public Member Functions inherited from openjaus::core::ManagementInterface
virtual	~ManagementInterface ()

virtual bool	storeID (SetEmergency *setEmergency)=0
	StoreID action with input SetEmergency. More...

virtual bool	deleteID (ClearEmergency *clearEmergency)=0
	DeleteID action with input ClearEmergency. More...

virtual ReportStatus	getReportStatus (QueryStatus *queryStatus)=0
	Send action for ReportStatus with input message QueryStatus. More...

virtual bool	isIDStored (ClearEmergency *clearEmergency)=0
	isIDStored condition. More...

Public Member Functions inherited from openjaus::core::AccessControlInterface
virtual	~AccessControlInterface ()

virtual void	init ()=0

virtual void	rejectController ()=0

virtual ReportControl	getReportControl (QueryControl *queryControl)=0
	Send a Report Control message with the specified control value Send a Report Control message with the specified control value. More...

virtual ReportAuthority	getReportAuthority (QueryAuthority *queryAuthority)=0
	Send a Report Authority message to querying client reporting the current authority value of this service Send a Report Authority message to querying client reporting the current authority value of this service. More...

virtual ReportTimeout	getReportTimeout (QueryTimeout *queryTimeout)=0
	Send a Report Timeout message specifying the timeout period of this service Send a Report Timeout message specifying the timeout period of this service. More...

virtual bool	setAuthority (RequestControl *requestControl)=0
	Set the current authority value of this service to the specified authority Set the current authority value of this service to the specified authority. More...

virtual bool	setAuthority (SetAuthority *setAuthority)=0
	Set the current authority value of this service to the specified authority Set the current authority value of this service to the specified authority. More...

virtual bool	resetTimer (RequestControl *requestControl)=0
	Reset the timer Reset the timer. More...

virtual bool	sendConfirmControlNotAvailable (RequestControl *requestControl)=0
	Send a confirm control message with the specified response code to requesting client Send a confirm control message with the specified response code to requesting client. More...

virtual bool	sendConfirmControlInsufficientAuthority (RequestControl *requestControl)=0
	Send a confirm control message with the specified response code to requesting client Send a confirm control message with the specified response code to requesting client. More...

virtual bool	sendConfirmControlAccepted (RequestControl *requestControl)=0
	Send a confirm control message with the specified response code to requesting client Send a confirm control message with the specified response code to requesting client. More...

virtual bool	sendRejectControlToController (RequestControl *requestControl)=0
	SendRejectControlToController action with input RequestControl. More...

virtual bool	sendRejectControlNotAvailable (ReleaseControl *releaseControl)=0
	SendRejectControlNotAvailable action with input ReleaseControl. More...

virtual bool	sendRejectControlReleased (ReleaseControl *releaseControl)=0
	SendRejectControlReleased action with input ReleaseControl. More...

virtual bool	sendRejectControlReleased (DismissController *dismissController)=0
	SendRejectControlReleased action with input DismissController. More...

virtual bool	storeAddress (RequestControl *requestControl)=0
	StoreAddress action with input RequestControl. More...

virtual bool	updateControlledList (ConfirmControl *confirmControl)=0
	Modifies list of controlled components based on confirm or reject messages Modifies list of controlled components based on confirm or reject messages. More...

virtual bool	updateControlledList (RejectControl *rejectControl)=0
	Modifies list of controlled components based on confirm or reject messages Modifies list of controlled components based on confirm or reject messages. More...

virtual bool	isDefaultAuthorityGreater (RequestControl *requestControl)=0
	True if the default authority code of this service is greater than the authority code of the client service that triggered the corresponding transition True if the default authority code of this service is greater than the authority code of the client service that triggered the corresponding transition. More...

virtual bool	isCurrentAuthorityLess (RequestControl *requestControl)=0
	True if the current authority value of this service is less than the authority code of the client service that triggered the corresponding transition True if the current authority value of this service is less than the authority code of the client service that triggered the corresponding transition. More...

virtual bool	isAuthorityValid (SetAuthority *setAuthority)=0
	True if the value of the authority code received from the client is less than or equal to the current authority value of this service, but greater than or equal to the receiving component�s default authority True if the value of the authority code received from the client is less than or equal to the current authority value of this service, but greater than or equal to the receiving component�s default authority. More...

virtual bool	isControllingClient (model::Message *message)=0
	True if the message that triggered the transition is received from the client that is in control of this service True if the message that triggered the transition is received from the client that is in control of this service. More...

Public Member Functions inherited from openjaus::core::EventsInterface
virtual	~EventsInterface ()

virtual bool	createEvent (CreateEvent *createEvent)=0
	CreateEvent action with input CreateEvent. More...

virtual bool	processEvent (ProcessEventRequest *processEventRequest)=0
	ProcessEvent action with input ProcessEventRequest. More...

virtual bool	resetEventTimer (CreateEvent *createEvent)=0
	ResetEventTimer action with input CreateEvent. More...

virtual bool	resetEventTimer (UpdateEvent *updateEvent)=0
	ResetEventTimer action with input UpdateEvent. More...

virtual bool	updateEvent (CreateEvent *createEvent)=0
	UpdateEvent action with input CreateEvent. More...

virtual bool	updateEvent (UpdateEvent *updateEvent)=0
	UpdateEvent action with input UpdateEvent. More...

virtual bool	cancelEvent (CancelEvent *cancelEvent)=0
	CancelEvent action with input CancelEvent. More...

virtual bool	stopEventTimer (CancelEvent *cancelEvent)=0
	StopEventTimer action with input CancelEvent. More...

virtual RejectEventRequest	getRejectEventRequest (CreateEvent *createEvent)=0
	Send action for RejectEventRequest with input message CreateEvent. More...

virtual RejectEventRequest	getRejectEventRequest (UpdateEvent *updateEvent)=0
	Send action for RejectEventRequest with input message UpdateEvent. More...

virtual RejectEventRequest	getRejectEventRequest (CancelEvent *cancelEvent)=0
	Send action for RejectEventRequest with input message CancelEvent. More...

virtual ConfirmEventRequest	getConfirmEventRequest (CreateEvent *createEvent)=0
	Send action for ConfirmEventRequest with input message CreateEvent. More...

virtual ConfirmEventRequest	getConfirmEventRequest (UpdateEvent *updateEvent)=0
	Send action for ConfirmEventRequest with input message UpdateEvent. More...

virtual ConfirmEventRequest	getConfirmEventRequest (CancelEvent *cancelEvent)=0
	Send action for ConfirmEventRequest with input message CancelEvent. More...

virtual ReportEvents	getReportEvents (QueryEvents *queryEvents)=0
	Send action for ReportEvents with input message QueryEvents. More...

virtual ReportEventTimeout	getReportEventTimeout (QueryEventTimeout *queryEventTimeout)=0
	Send action for ReportEventTimeout with input message QueryEventTimeout. More...

virtual bool	confirmEvent (ConfirmEventRequest *confirmEventRequest)=0
	ConfirmEvent action with input ConfirmEventRequest. More...

virtual bool	rejectEvent (RejectEventRequest *rejectEventRequest)=0
	RejectEvent action with input RejectEventRequest. More...

virtual bool	handleIncomingEvent (Event *event)=0
	HandleIncomingEvent action with input Event. More...

virtual bool	handleReportEvents (ReportEvents *reportEvents)=0
	HandleReportEvents action with input ReportEvents. More...

virtual bool	isSupported (CreateEvent *createEvent)=0
	isSupported condition. More...

virtual bool	isSupported (UpdateEvent *updateEvent)=0
	isSupported condition. More...

virtual bool	eventExists (CreateEvent *createEvent)=0
	eventExists condition. More...

virtual bool	eventExists (UpdateEvent *updateEvent)=0
	eventExists condition. More...

virtual bool	eventExists (CancelEvent *cancelEvent)=0
	eventExists condition. More...

Public Member Functions inherited from openjaus::core::TransportInterface
virtual	~TransportInterface ()

virtual bool	enqueue (model::Trigger *trigger)=0
	Convert the destination address into an unsigned integer such that the ComponentID maps to the least significant byte, NodeID to the next least significant byte and SubsystemID maps onto the remaining two bytes of the integer. More...

virtual bool	broadcastLocalEnqueue (model::Trigger *trigger)=0
	Package the message as specified by the transport layer specification and send it to all endpoints in the local subsystem. More...

virtual bool	broadcastGlobalEnqueue (model::Trigger *trigger)=0
	Package the message as specified by the transport layer specification and send it to all endpoints on all subsystems. More...

virtual bool	sendMessage (model::Trigger *trigger)=0
	SendMessage action with input SendMessage. More...

virtual bool	broadcastToNode (model::Trigger *trigger)=0
	Broadcasts message to all components within the local node Broadcasts message to all components within the local node. More...

virtual bool	broadcastToSubsystem (model::Trigger *trigger)=0
	Broadcasts a given message to all nodes in the local subsystem (equivalent to broadcast local enqueue) Broadcasts a given message to all nodes in the local subsystem (equivalent to broadcast local enqueue) More...

virtual bool	broadcastToSystem (model::Trigger *trigger)=0
	Broadcasts the message to all subsystems on the JAUS network (equivalent to broadcast global enqueue) Broadcasts the message to all subsystems on the JAUS network (equivalent to broadcast global enqueue) More...

virtual bool	checkTransportPolicy (model::Trigger *trigger)=0
	CheckTransportPolicy action with input CheckTransportPolicy. More...

virtual ReportTransportPolicy	getReportTransportPolicy (QueryTransportPolicy *queryTransportPolicy)=0
	Send action for ReportTransportPolicy with input message QueryTransportPolicy. More...

virtual bool	storeTransportPolicy (ReportTransportPolicy *reportTransportPolicy)=0
	StoreTransportPolicy action with input ReportTransportPolicy. More...

Static Public Member Functions
static OPENJAUS_DEPRECATED model::Service	ManipulatorEndEffectorPoseListDriverService ()
	Builds a default instance of the ManipulatorEndEffectorPoseListDriver Service and populates the URI and Version numbers. More...

static OPENJAUS_DEPRECATED std::string	ManipulatorEndEffectorPoseListDriverUri ()
	Static accessor for Service URI. More...

Static Public Member Functions inherited from openjaus::mobility::ListManagerInterface
static OPENJAUS_DEPRECATED model::Service	ListManagerService ()
	Builds a default instance of the ListManager Service and populates the URI and Version numbers. More...

static OPENJAUS_DEPRECATED std::string	ListManagerUri ()
	Static accessor for Service URI. More...

Static Public Member Functions inherited from openjaus::core::ManagementInterface
static OPENJAUS_DEPRECATED model::Service	ManagementService ()
	Builds a default instance of the Management Service and populates the URI and Version numbers. More...

static OPENJAUS_DEPRECATED std::string	ManagementUri ()
	Static accessor for Service URI. More...

Static Public Member Functions inherited from openjaus::core::AccessControlInterface
static OPENJAUS_DEPRECATED model::Service	AccessControlService ()
	Builds a default instance of the AccessControl Service and populates the URI and Version numbers. More...

static OPENJAUS_DEPRECATED std::string	AccessControlUri ()
	Static accessor for Service URI. More...

Static Public Member Functions inherited from openjaus::core::EventsInterface
static OPENJAUS_DEPRECATED model::Service	EventsService ()
	Builds a default instance of the Events Service and populates the URI and Version numbers. More...

static OPENJAUS_DEPRECATED std::string	EventsUri ()
	Static accessor for Service URI. More...

Static Public Member Functions inherited from openjaus::core::TransportInterface
static OPENJAUS_DEPRECATED model::Service	TransportService ()
	Builds a default instance of the Transport Service and populates the URI and Version numbers. More...

static OPENJAUS_DEPRECATED std::string	TransportUri ()
	Static accessor for Service URI. More...

Detailed Description

The function of the End-Effector Pose List Driver is to perform closed-loop control of a sequence of positions and orientations of the tool tip specified in vehicle coordinate system. The sequence of targets is specified by one or more SetElement messages, as defined by the List Manager Service. The "Set Motion Profile" message is used to set maximum velocity and acceleration rates for each of the variable joint parameters. All motions utilize the motion profile data that was most recently sent. Default settings are not assumed so that upon initialization this message must be sent before the first "ExecuteList" message is sent.

URI: urn:jaus:jss:manipulator:ManipulatorEndEffectorPoseListDriver

Version: 1.0

Inherits From:

urn:jaus:jss:mobility:ListManager

Constructor & Destructor Documentation

§ ~ManipulatorEndEffectorPoseListDriverInterface()

virtual openjaus::manipulator::ManipulatorEndEffectorPoseListDriverInterface::~ManipulatorEndEffectorPoseListDriverInterface ( )

inlinevirtual

Member Function Documentation

§ elementExists()

virtual bool openjaus::manipulator::ManipulatorEndEffectorPoseListDriverInterface::elementExists ( ExecuteList * executeList )

pure virtual

elementExists condition.

Parameters

[in] executeList - Input Trigger.

Returns: Whether the condition is true.

Implemented in openjaus::manipulator::services::ManipulatorEndEffectorPoseListDriver.

§ executeTargetList()

virtual bool openjaus::manipulator::ManipulatorEndEffectorPoseListDriverInterface::executeTargetList ( ExecuteList * executeList )

pure virtual

Begin sequential execution of the target list starting at the specified element.

Parameters

[in] executeList - Input Trigger.

Returns: Whether the message was properly processed by this action.

Implemented in openjaus::manipulator::services::ManipulatorEndEffectorPoseListDriver.

§ getReportActiveElement()

virtual ReportActiveElement openjaus::manipulator::ManipulatorEndEffectorPoseListDriverInterface::getReportActiveElement ( QueryActiveElement * queryActiveElement )

pure virtual

Parameters

[in] queryActiveElement - Input Trigger.

Returns: ReportActiveElement Output Message.

Implemented in openjaus::manipulator::services::ManipulatorEndEffectorPoseListDriver.

§ getReportCommandedEndEffectorPose()

virtual ReportCommandedEndEffectorPose openjaus::manipulator::ManipulatorEndEffectorPoseListDriverInterface::getReportCommandedEndEffectorPose ( QueryCommandedEndEffectorPose * queryCommandedEndEffectorPose )

pure virtual

Parameters

[in] queryCommandedEndEffectorPose - Input Trigger.

Returns: ReportCommandedEndEffectorPose Output Message.

Implemented in openjaus::manipulator::services::ManipulatorEndEffectorPoseListDriver.

§ getReportJointMotionProfile()

virtual ReportJointMotionProfile openjaus::manipulator::ManipulatorEndEffectorPoseListDriverInterface::getReportJointMotionProfile ( QueryJointMotionProfile * queryJointMotionProfile )

pure virtual

Parameters

[in] queryJointMotionProfile - Input Trigger.

Returns: ReportJointMotionProfile Output Message.

Implemented in openjaus::manipulator::services::ManipulatorEndEffectorPoseListDriver.

§ getReportManipulatorSpecifications()

virtual ReportManipulatorSpecifications openjaus::manipulator::ManipulatorEndEffectorPoseListDriverInterface::getReportManipulatorSpecifications ( QueryManipulatorSpecifications * queryManipulatorSpecifications )

pure virtual

Parameters

[in] queryManipulatorSpecifications - Input Trigger.

Returns: ReportManipulatorSpecifications Output Message.

Implemented in openjaus::manipulator::services::ManipulatorEndEffectorPoseListDriver.

§ getReportToolOffset()

virtual ReportToolOffset openjaus::manipulator::ManipulatorEndEffectorPoseListDriverInterface::getReportToolOffset ( QueryToolOffset * queryToolOffset )

pure virtual

Parameters

[in] queryToolOffset - Input Trigger.

Returns: ReportToolOffset Output Message.

Implemented in openjaus::manipulator::services::ManipulatorEndEffectorPoseListDriver.

§ ManipulatorEndEffectorPoseListDriverService()

static OPENJAUS_DEPRECATED model::Service openjaus::manipulator::ManipulatorEndEffectorPoseListDriverInterface::ManipulatorEndEffectorPoseListDriverService ( )

inlinestatic

Returns: model::Service - The populated service.

§ ManipulatorEndEffectorPoseListDriverUri()

static OPENJAUS_DEPRECATED std::string openjaus::manipulator::ManipulatorEndEffectorPoseListDriverInterface::ManipulatorEndEffectorPoseListDriverUri ( )

inlinestatic

Returns: std::string - Service URI

§ motionProfileExists() [1/2]

virtual bool openjaus::manipulator::ManipulatorEndEffectorPoseListDriverInterface::motionProfileExists ( QueryJointMotionProfile * queryJointMotionProfile )

pure virtual

motionProfileExists condition.

Parameters

[in] queryJointMotionProfile - Input Trigger.

Returns: Whether the condition is true.

Implemented in openjaus::manipulator::services::ManipulatorEndEffectorPoseListDriver.

§ motionProfileExists() [2/2]

virtual bool openjaus::manipulator::ManipulatorEndEffectorPoseListDriverInterface::motionProfileExists ( ExecuteList * executeList )

pure virtual

motionProfileExists condition.

Parameters

[in] executeList - Input Trigger.

Returns: Whether the condition is true.

Implemented in openjaus::manipulator::services::ManipulatorEndEffectorPoseListDriver.

§ setJointMotionProfile()

virtual bool openjaus::manipulator::ManipulatorEndEffectorPoseListDriverInterface::setJointMotionProfile ( SetJointMotionProfile * setJointMotionProfile )

pure virtual

Set the joint motion profile parameters for the manipulator.

Parameters

[in] setJointMotionProfile - Input Trigger.

Returns: Whether the message was properly processed by this action.

Implemented in openjaus::manipulator::services::ManipulatorEndEffectorPoseListDriver.

§ setToolOffset()

virtual bool openjaus::manipulator::ManipulatorEndEffectorPoseListDriverInterface::setToolOffset ( SetToolOffset * setToolOffset )

pure virtual

Parameters

[in] setToolOffset - Input Trigger.

Returns: Whether the message was properly processed by this action.

Implemented in openjaus::manipulator::services::ManipulatorEndEffectorPoseListDriver.

§ stopMotion()

virtual void openjaus::manipulator::ManipulatorEndEffectorPoseListDriverInterface::stopMotion ( )

pure virtual

Implemented in openjaus::manipulator::services::ManipulatorEndEffectorPoseListDriver.

The documentation for this class was generated from the following file:

include/openjaus/manipulator/ManipulatorEndEffectorPoseListDriverInterface.h

Public Member Functions

Static Public Member Functions

Detailed Description

Constructor & Destructor Documentation

§ ~ManipulatorEndEffectorPoseListDriverInterface()

Member Function Documentation

§ elementExists()

§ executeTargetList()

§ getReportActiveElement()

§ getReportCommandedEndEffectorPose()

§ getReportJointMotionProfile()

§ getReportManipulatorSpecifications()

§ getReportToolOffset()

§ ManipulatorEndEffectorPoseListDriverService()

§ ManipulatorEndEffectorPoseListDriverUri()

§ motionProfileExists() [1/2]

§ motionProfileExists() [2/2]

§ setJointMotionProfile()

§ setToolOffset()

§ stopMotion()